একটি অতিস্বনক জল মিটার ইনস্টল করার জন্য সতর্কতা কি কি?
At present, the application range of ultrasonic water meters is very wide, so what should be paid attention to when installing ultrasonic water meters?
When installing an ultrasonic water meter, you must first consider whether the diameter of your ultrasonic water meter is consistent with the diameter of the water supply pipe, that is, the diameter of the meter body is required to be consistent with the diameter of the front and rear pipe sections of the water supply pipe, so that it can be installed and used; In addition, the selected ultrasonic water meter Be sure to choose products produced by regular manufacturers, so that the product quality will be more reliable and the service life will be longer; the water supply pipeline must be cleaned before installation of the ultrasonic water meter to avoid sand, hemp and other debris in the pipe, and avoid installation. Afterwards, the problem of measurement instability or data error occurs; when installing the ultrasonic water meter, it is best to install it horizontally or vertically, so as to ensure normal use. Generally, there is an arrow on the surface of the ultrasonic water meter, and the direction indicated by this arrow is the water flow. When installing, pay attention to the direction of the water flow and the direction of the arrow on the meter body; the ultrasonic water meter must be installed in the position to ensure that the length of the straight section in front of the meter body is 10 times the diameter of the pipe, and the length behind the meter The length of the straight pipe section should reach 5 times the length of the pipe diameter, in order to be able to measure the water flow more accurately.
Sh-meters specializes in the production of ultrasonic water meters suitable for various calibers, welcome your consultation.